EAW CAZ1400 Amplifier

EAW CAZ1400 Amplifier
Order now: https://cuesale.com/product/eaw-caz1400-amplifier/


The CAZ series amplifiers are designed for continuous duty in speech, music, paging and sound reinforcement applications in churches, schools, offices, arenas, hotel meeting rooms, convention centers, recreation facilities and other venues demanding high performance, flexible features, and rugged dependability.
A rear panel low-cut switch allows you to remove low frequencies (below 30 Hz), and a clip-eliminator allows extra protection for your speakers by preventing the amplifier from being overloaded.
The amplifier can operate in stereo, dual-mono, or bridged mono.
The outputs are screw terminals that accept bare wire or spade terminals.
There are screw terminal inputs, and combination inputs, capable of accepting balanced XLR, 1/4″ TRS, or unbalanced 1/4″ TS connections from line-level sources. Two front panel level controls allow adjustment of the input signals.
The front panel has a rocker power switch with a power LED, and each channel has a signal-present LED and an overload LED.
The amplifier output stage is fully protected against permanent damage caused by overloading, shorts, and extreme temperatures.
The front panel incorporates holes for rack mounting, and it will take up two rack spaces. There are two handles fitted on the front panel for easy transporting.

Key Features :

CAZ1400: 1400 watts continuous @ 4 ohms bridged
Ultra-low noise/low-distortion design
Switchable low-cut fi lter @ 30 Hz on both channels
Switchable limiter on both channels
Combination 1/4″ TRS and XLR line input jacks
Screw terminal input connectors (balanced)
Specifications :

Continuous Sine Wave Average Output Power, both channels driven, 20 Hz to 20 kHz :
2 ohms: 800 W
4 ohms: 450 W
8 ohms: 310 W
Bridged Mono Operation, 20 Hz to 20 kHz :
4 ohms: 1400 W
8 ohms: 900 W
Power Bandwidth : 5 Hz to 50 kHz (+0, –3 dB)
Frequency Response : 25 Hz to 25 kHz (+0, –1 dB)
Distortion; THD and SMPTE IMD; 20 Hz to 20 kHz : < 0.03 % @ 8 ohms
Signal-to-Noise Ratio : > 100 dB below rated power into 4 ohms
Channel Separation : > 90 dB @ 1 kHz
Damping Factor : > 300 @ 1 kHz and below
Input Impedance :
20 kΩ balanced
10 kΩ unbalanced
Input Sensitivity : 1.15 V (+3.4 dBu) for rated power into 4 ohms
Gain : 32 dB
Maximum Input Level : 9.75 Vrms (+22 dBu)
Turn On Delay : 2.5 seconds
Subsonic Filter : – 9 dB @ 30 Hz


€95,00 Ex V.A.T. (MwST) per piece.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com