For sale Lectrosonics In-Ear set IFB R5 receiver and an IFB T5 transmitter with the frequency 768.000 - 793.500 MHz (Block 30).
In good and working condition.
The product you see in the photos is the product you buy.
Information from the manufacturer:
General Technical Description
The IFBR5 was upgraded to the IFBR5a by adding a number of important and useful features:
Two rotary HEX switches to manually set the operating frequency,
Automatic sensing/control
of a mono phone plug to eliminate the mono/binaural switch,
and A multicolor LED for battery status. The Frequency scan and memory features were retained.
The IFB R5a Receiver is comprised of a number of functional subsystems,
Control Panel and, Receiver Block Diagram.
General Features
The frequency agile IFB R5a FM Receiver is designed to operate with the
Lectrosonics IFB T1 Transmitter and features microprocessor control of 256
frequencies of operation within each frequency block. Each block covers 25.5 MHz
with 0.1 MHz frequency spacing. Any one of ten different frequency blocks are
factory available from 512 MHz to 805.5 MHz (except 608 to 614 MHz).
The unique microcontroller design in this receiver provides simple one knob and one
LED operation for audio level, switching frequencies (channels), and easy on-the-fly
programming. The receiver frequency can be set by manually using the two rotary
HEX switches on the side of the unit or by using the automatic scan and store
function, or both.
When powered ON, the receiver will default to the frequency set by
the switches. A nonvolatile memory can store up to five additional frequencies
accessible by pressing the knob. The memory remains during power OFF and even
with the battery removed.
The IFB R5a Receiver uses 20 kHz FM deviation for efficient use of the bandwidth
and a single band compandor for clean quiet audio.
The Pilot Tone squelch locks the reception to the mating IFB T5 Transmitter and
ignores other signals.
The receiver operates on one 9 Volt alkaline battery for up to 8 hours and features a
tricolor LED low battery indicator. The voltages are internally regulated for stability.
The receiver is housed in a compact, rugged, lightweight aluminum enclosure.
The unit features a durable removable belt clip and an integral swing-aside battery compartment door.