Prolights ECLFR2KDY FRESNEL projector BK, 1x500W 5600K LED, angle 16-64°, barndoors incl.

EclFresnel 2K is the LED replacement for a standard tungsten 2.000W Fresnel. Featuring the output characteristics of a traditional Fresnel but with beam control, functional barn doors and a power source that focuses on outstanding colour rendition. The EclFresnel 2K adds all the advantages of LED to the Fresnel.

Features:
TU (3.200 K) and DY (5.600 K) versions available both with HD dimming
Fresnel lens with 16° to 64° zoom range
Silent operation for studio and stage use

LIGHT SOURCE
Source: 500W high-power white LED
CCT: (TU) 3.200 K - (DY) 5.600
Luminous flux: (TU) (16°) 20'256 lm; (64°) 26'126 @full
Luminous flux: (DY) (16°) 26'255 lm; (64°) 32'428 lm @ full
Lux: (TU) (16°) 9'047 lx - (64°) 1'770lx @5 m full
Lux: (DY) (16°) 11'975 lx - (64°) 2'306lx @5 m full
CRI: (TU) >94; (DY) >91
R9: (TU) >73; (DY) >80
TLCI: (TU) >93; (DY) >93
TM30 Rf: (TU) >92; (DY) >88
TM30 Rg: (TU) <103; (DY) <104
Source life expectancy: > 50.000 h
OPTICS
Zoom: 16° - 64° manual
Lens diameter: 250mm
Lens type: Fresnel zoom lens
Other: spigot, barndoor and gel frame included
COLOUR SYSTEM
Colour mixing: warm white
Macros: several pre-built macros with adjustable speed
DYNAMIC EFFECTS
Static mode: selection of static dimmer
Manual mode: manual adjust of dimmer throught menu and knob
Auto mode: built-in programs with execution speed adjustment
BODY
Hardware on-board: filter frame, 8 doors barndoor, spigot
Pan angle: (for pole operated version) 360° with manual regulation
Tilt angle: (for pole operated version) 180° with manual regulation
Body: sturdy die-cast aluminium body
Body colour: black, white finishing available
Other: Spigot 28 mm
CONTROL
Protocols: DMX512, RDM, rotatory knob
DMX channels: 1 / 2 - 1 / 2 - 2 / 3 / 5channel
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain
Other: 16bit control of dimmer
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: selectable dimming modes available
Strobe / shutter: 1 - 30 Hz, electronic
Operating temperature: -10° ~ +45°
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
Mains power supply: 100-240V - 50/60Hz
Max power consumption: 500W
Output (at 230V): 4 units on a single power line
Power factor: >0,96
Inrush current: 110VAC/18.8A, 230VAC/29.2A
PHYSICAL
IP rating: 20
Cooling: combination of heat pipe cooling system and low noise fan
Suspension and fixing: bracket for hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
Dimensions (WxHxD): 421x537x456mm
Dimensions with PO system (WxHxD): 401x691x456mm
Weight: 17,2kg
Weight with PO system: 18kg
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
1 x ECLFR2K
1 x 1,5 meters power cable (BARE END - NEUTRIK POWERCON TRUE1 IP65)
1 x ECLFRSPG
1 x ECLFR2KBD
1 x ECLFR2KTPG
User Manual