Extron DA6 RGBHV Distribution Amplifier

Extron DA6 RGBHV – Six Output Wideband RGBHV Distribution Amplifier
Order now: https://cuesale.com/product/extron-da6-rgbhv-distribution-amplifier/


The Extron DA6 RGBHV is a six output, rack-mountable, analog distribution amplifier. It accepts and distributes RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video on female BNC connectors. In addition, the DA6 RGBHV provides DIP switches for adjusting RGB gain and peaking, as well as for selecting AC or DC coupling. A 9-pin contact closure connector allows for output muting controls when used with a control system.
With 350 MHz (-3 dB) video bandwidth, fully loaded, the DA6 RGBHV is perfect for maintaining signal integrity over long cable runs. It includes an internal international power supply and is housed in a 1U, full rack width metal enclosure for mounting convenience.

Features

Input: One set of female BNC connectors
Output: Six sets of female BNC connectors
350 MHz (-3 dB) RGB video bandwidth, fully loaded
Compatible with RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video signals
Selectable gain and peaking
AC or DC coupling per input
Output muting control via contact closure
1U, rack-mountable, durable, metal enclosure
Internal Extron Everlast™ power supply — Provides worldwide power compatibility, with high‑demonstrated reliability and low power consumption for reduced operating cost

Specifications

Video

Gain : Unity (0 dB) or 1.1 dB (110%), switch-selectable, when input = 0.7 V, output = 0.7 V or 0.8 V, respectively.
Peaking : DA6 YUV A : 0 dB
Bandwidth : 350 MHz (-3 dB), fully loaded
Differential phase error : <1.0° at 5 MHz
Differential gain error : <1.0% at 5 MHz

Video input

Number/signal type : 1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
Connectors : 5 female BNC
Nominal level (at unity gain) :
– 1.0 Vp-p for Y of component video and S-video, and for composite video
– 0.7 Vp-p for RGB, for R-Y and B-Y of component video
– 0.3 Vp-p for C of S-video
Minimum/maximum levels : Analog 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance : 75 ohms
Horizontal frequency : 15 kHz to 180 kHz
Vertical frequency : 15 Hz to 170 Hz
Return loss <-38 dB @ 5 MHz
DC offset (max. allowable) : 5.0 V (in AC coupling mode)
Input coupling : AC/DC, switch-selectable

Video output

Number/signal type : 2, 4, or 6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
Connectors : (2, 4, or 6) x 5 female BNC
Nominal level :
– 1.0 Vp-p for Y of component video and S-video, and for composite video
– 0.7 Vp-p for RGB, for R-Y and B-Y of component video
– 0.3 Vp-p for C of S-video
Minimum/maximum levels : 0.3 Vp-p to 1.5 Vp-p (follows input)
Impedance : 75 ohms
Return loss : <-44 dB @ 5 MHz
DC offset : ±5 mV with input at 0 offset

Sync

Input/output type : RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Input level : Analog or TTL: 0.5 V to 5 Vp-p
Output level : TTL: 5 Vp-p, unterminated
Input impedance : 510 ohms
Output impedance : 75 ohms
Max. input voltage : 5.0 Vp-p
Max. propagation delay : 35 ns
Max. rise/fall time : 4 ns
Polarity : Positive or negative (follows input)


€25,00 Ex V.A.T. (MwST) per piece.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com