QSC MX 1000a Verstärker

Zum Verkauf steht eine gebrauchte aber voll funktionsfähige QSC MX 1000a.

Der Verstärker ist geprüft. Das Case ist nicht Bestandteil der Anzeige.
Versand ist auf Anfrage möglich.

Technische Daten:

OUTPUT POWER (per channel)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 250 watts
8 ohms, 1kHz, 1% THD, 275 watts
4 ohms, 20 Hz to 20 kHz, 0.1% THD, 350 watts
4 ohms, 1 kHz, 1% THD, 400 watts
2 ohms, 1 kHz, 1% THD, 500 watts*

OUTPUT POWER (bridged mono)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 700 watts
4 ohms, 1 kHz, 1% THD 1000 watts (typical)

DISTORTION:
SMPTE-IM, less than 0.05%
FREQUENCY RESPONSE:
20 Hz to 20 kHz, ±0.15 dB
8 Hz to 100 kHz, +0/-3 dB

DAMPING FACTOR: Greater than 200
DYNAMIC HEADROOM: 3 dB at 4 ohms
NOISE: 100 dB below rated output (20 Hz to 20 kHz)
SENSITIVITY: 1.12 Vrms for rated power (8 ohms)
VOLTAGE GAIN: 40 (32 dB)
INPUT IMPEDANCE: 10K unbalanced, 20K balanced

CONTROLS:
Front: AC Switch, Ch 1 and Ch 2 Gain Knobs
Back: Parallel/Stereo/Bridge Switch

INDICATORS:
PWR-ON: Green LED
SIGNAL PRESENT: Yellow LED
CLIP: Red LED
PROT: Red LED

CONNECTORS: (each channel)
Input: Barrier strip and 1/4" RTS
Speakers: "Touch proof" binding posts
COOLING: Two-speed fan, rear-to-front air flow.

AMPLIFIER PROTECTION:
Full short circuit†, open circuit, ultrasonic, and RF protection. Stable into reactive or mismatched
loads.

LOAD PROTECTION:
On/off muting. DC-fault load grounding relay with internal fault fuses.

OUTPUT CIRCUIT TYPE:
Complementary linear outputs, 2 step high efficiency circuit.
POWER REQUIREMENTS: 100,120, 240 Vac, 50-60 Hz
POWER CONSUMPTION:
Normal Operation: 4 ohms per channel: less than 7.5 amps, 120 Vac (900 VA) maximum (full power,
2 ohms per channel): 22 amps, 120 Vac (2640 VA)

DIMENSIONS:
19.0" (48.3 cm) rack mounting
3.5" (8.9 cm) tall (2 spaces)
17.9" (45.5 cm) deep (rear support ears)

WEIGHT: 19.1 kg