Lab gruppen PLM 20000QSP

For sale are 4 pieces of Lab gruppen PLM 200000QSP.

Needlesly to say the amplifier talks for itself. I added the specifications on the bottum for the people that still doubt the performance of these beasts.

The amps are in great condition & always used in a shockmount flightcase. Have only been used inside and have not toured on festivals! Can be tested.


Contact me if u have any questions.



Number of input channels
2

Number of output channels
4

Peak total output all channels driven
20000 W

Peak output voltage per channel
194 V

Max output current per channel
67 A peak

Max output power (all channels driven)
16 ohms
1150 W

8 ohms
2300 W

4 ohms
4400 W 1

2 ohms
4800 W 1

All channels driven into optimal impedance interval
> 5000 W into 2.2 - 3.3 ohms

Max output power bridged
8 ohms
8800 W

4 ohms
9600 W

Bridged into optimal impedance interval
> 10000 W into 4.4 – 6.6 ohms

Device presets
Local memory locations for the settings of the product
100

Performance
THD + N 20 Hz - 20 kHz for 1 W
< 0.05 %

THD + N at 1 kHz and 1 dB below clipping
< 0.04 %

Dynamic range with digital inputs (for all supported sample rates)
>114 dB

Dynamic range with analog inputs
>110 dB

Frequency response (1 W into 8 Ohm, 20 Hz - 20 kHz)
+/- 0.05 dB

Common Mode Rejection (CMR)
>74 dB, 20 Hz to 20 kHz

Internal Sample Rate / Data path
96 kHz / 32 bit floating point

Product propagation delay (straight path analog server input -> amp)
1.61 ms

Product propagation delay AES 96 kHz / analog input
1.68 ms

Sample Rate Converters
THD + Noise
0.00003 %, 20 Hz - 20 kHz, unweighted

Analog to Digital inputs
Inputs
2 inputs x 2 link

Input sensitivity settings
+12 or +26 dBu

THD + Noise
0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting

THD + Noise
0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting

Gain, Sensitivity and Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL)
17.8 - 194 V, step size 0.1 V

Current Peak Limiter < 300 ms
67 A peak

Current Average Limiter (CAL) > 300 ms
33 Arms

MaxRMS (rms voltage limiter)
Yes

MaxPeak (peak voltage limiter)
Yes

Output attenuator
-Inf to 0 dB, step size 0.25 dB

AES3/EBU (sample rate converters available as desired)
Support redundant paths
Yes

Flexible topology
yes

Supported sample rates
48, 96 kHz

Back panel Interface
AES / EBU / I/O (input + link)
2 x 3-pin XLR

Analog, 2-channel I/O (input + link)
4 x 3-pin XLR, electronically balanced

Output connectors
Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs)

Auto 10/100, Auto Uplink
2 x RJ45 etherCON

Control and monitoring interface
Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)

Detachable mains cord
Neutrik PowerCon rated at 250V/32A

Cooling
Three fans, front-rear airflow, temperature controlled speed

Front-panel user interface
Display
2.5 inch, daylight readable LCD

Fault/Warning/Limit/Clip indicators
RGB LEDs and detailed fault description on display

Mute and soft function buttons
8 provided

Standby Power button
On/Standby

Meter button
Toggles through meter views

Menu
Provides a menu driven interface for full function front panel control

Rotary Encoder
Yes

Exit Button
Provides a “back” function

Power
Operating voltage
70-265 V AC

Soft start / Inrush power
Yes/ Max 8 A

Power Average Limiter (PAL)
Yes

Power Factor Correction (PFC)
Yes

Breaker Emulation Limiter (BEL)
Yes, selectable breaker profile

Under Voltage Limiter (UVL)
Yes

Dimensions
Rack rail to rear panel
W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")

Weight
Weight
17 kg (37 lbs)