Zum Verkauf steht eine gebrauchte aber voll funktionsfähige QSC MX 1000a.
Der Verstärker ist geprüft. Das Case ist nicht Bestandteil der Anzeige.
Versand ist auf Anfrage möglich.
Technische Daten:
OUTPUT POWER (per channel)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 250 watts
8 ohms, 1kHz, 1% THD, 275 watts
4 ohms, 20 Hz to 20 kHz, 0.1% THD, 350 watts
4 ohms, 1 kHz, 1% THD, 400 watts
2 ohms, 1 kHz, 1% THD, 500 watts*
OUTPUT POWER (bridged mono)
8 ohms, 20 Hz to 20 kHz, 0.1% THD, 700 watts
4 ohms, 1 kHz, 1% THD 1000 watts (typical)
DISTORTION:
SMPTE-IM, less than 0.05%
FREQUENCY RESPONSE:
20 Hz to 20 kHz, ±0.15 dB
8 Hz to 100 kHz, +0/-3 dB
DAMPING FACTOR: Greater than 200
DYNAMIC HEADROOM: 3 dB at 4 ohms
NOISE: 100 dB below rated output (20 Hz to 20 kHz)
SENSITIVITY: 1.12 Vrms for rated power (8 ohms)
VOLTAGE GAIN: 40 (32 dB)
INPUT IMPEDANCE: 10K unbalanced, 20K balanced
CONTROLS:
Front: AC Switch, Ch 1 and Ch 2 Gain Knobs
Back: Parallel/Stereo/Bridge Switch
INDICATORS:
PWR-ON: Green LED
SIGNAL PRESENT: Yellow LED
CLIP: Red LED
PROT: Red LED
CONNECTORS: (each channel)
Input: Barrier strip and 1/4" RTS
Speakers: "Touch proof" binding posts
COOLING: Two-speed fan, rear-to-front air flow.
AMPLIFIER PROTECTION:
Full short circuit†, open circuit, ultrasonic, and RF protection. Stable into reactive or mismatched
loads.
LOAD PROTECTION:
On/off muting. DC-fault load grounding relay with internal fault fuses.
OUTPUT CIRCUIT TYPE:
Complementary linear outputs, 2 step high efficiency circuit.
POWER REQUIREMENTS: 100,120, 240 Vac, 50-60 Hz
POWER CONSUMPTION:
Normal Operation: 4 ohms per channel: less than 7.5 amps, 120 Vac (900 VA) maximum (full power,
2 ohms per channel): 22 amps, 120 Vac (2640 VA)
DIMENSIONS:
19.0" (48.3 cm) rack mounting
3.5" (8.9 cm) tall (2 spaces)
17.9" (45.5 cm) deep (rear support ears)
WEIGHT: 19.1 kg