Atlona AT-HD-RG100SR HDMI Audio Video Leistungsverstärker AV Sender & 2 Empfänger

Atlona AT-HD-RG100SR HDMI Audio Video Leistungsverstärker AV Sender & 2 Empfänger

Keine original Netzteile !
Es handelt sich um gebrauchte Geräte aus Vermietbestand.
Altersgemäßer Gebrauchtgerätezustand. Verkauft wird nur, was auf den Bildern zu sehen ist und im Text beschrieben wird.
Aus den zum Artikel gehörigen technischen Informationen des Herstellers haben wir folgende Daten entnommen:

Beschreibung :
Atlona AT-HD-RG100SR Audio-/Video-Leistungsverstärker AV-Sender & -Empfänger Schwarz, Rot:
Atlona AT-HD-RG100SR. Typ: AV-Sender & -Empfänger, Maximale Auflösung: 1920 x 1200 Pixel, Maximal mögliche Übertragungsstrecke: 100 m. Arbeitsspannung: 5 V, Stromstärke: 4 A. Abmessungen (BxTxH): 91,4 x 127 x 28 mm, Gewicht: 544 g

The AT-HD-RG100SR HDMI over 5-Wire Extender Kit with Bi-Directional IR allows users to extend HDMI transmission ranges up to 330ft (100m) with resolutions as high as 1080p and also supports 3D. AT-HD-RG100SR is extremely easy to install and works perfectly with existing RGBHV, mini-RGB or RG-6 coaxial cables. It will even work with existing component cables which make it perfect using existing infrastructure and new technology. These extenders are featured with Bi-Directional IR pass-through extension, allowing user to control the remote HDMI source devices such as Blu-ray players, Cable/Sat Boxes, Video Game consoles, etc... instantly at the display location.

The AT-HD-RG100SR HDMITM over 5-Wire Extender with Bi-Directional IR allows user to extend HDMITM transmission range up to 330ft (100m) with resolutions as high as 1080p 50/60Hz and also supports 3D. AT-HDRG100SR is extremely easy to install and works perfectly with existing RGBHV or RG-6 coaxial cables, even
original Component + Audio cables will work, which makes it perfect to retrofit those extenders to the current
technology. Built with Bi-Directional IR pass-through extension, users can control the remote HDMITM source
devices such as Blu-ray players, Cable/Sat Boxes, Video Game consoles, etc… instantly at the display site. The
Bi-Directional IR also gives advantage to user to control display via Control System by sending commands (such
as on/off, input change, etc...) from Control System to Display.
The AT-HD-RG100SR comes with one transmitting module and one receiving module. Both transmitter modules are based on the HDMITM 1.3C and HDCP 2.0 and therefore are compatible with:
• All latest video formats such as 1920x1200 or 1080p
• 3D Compatible (all 7 formats)
• EDID pass-though (very important if user would want to connect sources such as computers, 3D players,
latest Satellite receivers).
• Supports all latest Audio formats such as Dolby True HD, DTS-master, etc…
• HDCP compatible
• 3D capable
• HDMITM 1.3c and DVI 1.0 compliant
• HDCP compliant
• Supports 7.1-channel DTS-HD Master Audio and Dolby TrueHD high bitrate audio
• Supports Deep Color and x.v.Color (xvYCC)
• Extends the transmission range up to 330ft (100m) at full 1080p 24-bit color depth; and up to 165ft (50m)
at full 1080p 36-bit color depth
• Supports bi-directional IR pass-through (0~60Khz) and Consumer Electronics Control (CEC) channel
• Supports Video resolutions up to WQXGA (2560x1600@60Hz or 1920x1200@75Hz) or 1080p
• Supports VESA DDC and Hot-Plug Detect (HPD)

Technical Transmitter Receiver
3D Support Yes Yes
HDMITM compliance HDMI 1.3c
HDCP compliance Yes
Video bandwidth Single-link 340MHz [10.2Gbps]
Video Support 480i / 480p / 720p / 1080i / 1080p60 / 1920x1200@75 / 2560x1600@60
Audio Support Surround sound (up to 7.1ch) or stereo digital audio
HDMITM over Coax transmission
range
Full HD [1080p 24-bit color] @ 330ft (100m)
Deep Color Full HD [1080p 36-bit color] – 165ft (50m)
HDMITM equalization N/A Auto
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
ESD protection [1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB stack-up 4-layer board [impedance control — differential 100 Ω; single 50 Ω]
Input 1x HDMITM
1x IR socket for IR receiver
5x BNC
1x IR socket for IR receiver
Output 5x BNC
1x IR socket for IR blaster
1x HDMITM
1x IR socket for IR blaster
IR remote control Electro-optical characteristics: T = 25 o
/ Carrier frequency: 20-60kHz
HDMITM connector Type A [19-pin female]
BNC connector 75 Ω interlocking socket
3.5mm connector Earphone jack for IR blaster and IR receiver
Mechanical
Housing Metal enclosure
Dimensions
(L x W x H)
Model [TX/RX] – 93 x 128 x 27mm [3.6” x 5” x 1.1”]
Package 175 x 270 x 80mm [6.9” x 10.6” x 3.1”]
Carton 450 x 370 x 300mm [1’6” x 1’3” x 1’]
Weight Model 560g [1.2 lbs]
Package 1350g [3.0 lbs]
Fixedness Interlocking power supply & wall-mount case with screws
Power supply +5V 2A DC
Power consumption 3 Watts [max]
Operation temperature 0~40o