Martin Audio FP4

FlexPoint FP4

The loudspeaker shall be a passive, two-way coaxial system comprising a 4” low frequency driver and a 1” dome/0.7” exit compression driver. It shall be operated in conjunction with a dedicated electronic controller or controller amplifier.

The dispersion of the loudspeaker shall be 110° conical and its on-axis frequency response shall be 142Hz-18kHz +/- 3dB. Its power handling shall be 60W AES, 240W peak, and it shall produce a maximum SPL of 108dB peak at 1 metre. Rated impedance shall be 16 ohms.

The rear connector panel shall be fitted with two NL4MP type connectors and a Phoenix terminal block. Low and high frequency sections shall be integrated by an internal 2.6kHz passive crossover network.

The enclosure shall be constructed from plywood and finished with a hardwearing textured paint. It shall incorporate threaded inserts for U-bracket, wall bracket and mic stand mounting options. The coaxial driver shall be protected by a perforated steel grille with a triple-layer polyester backing.

Dimensions (W x H x D) shall be 130mm x 130mm x 126mm (5.1in x 5.1in x 5.0in). Weight shall be 1.9kg (4.2lbs).

Sold as set of 4pieces in case in brand new condition after one event