Genter AP800

Model Details
Extreme flexibility for your applications
The AP800 provides extreme flexibility for your applications. In addition to Gentner® Distributed Echo Cancellation®, the AP800 provides eight microphone/line inputs, four auxiliary line-level inputs, and 12 auxiliary line-level outputs. These outputs are ideal for integrating codecs, AP10 telephone interfaces, external PAs, sound reinforcement, VCRs, and CD players.

Up to eight AP800s and 16 AP10s can be linked together using ClearOne's G-Link digital network bus.

Six customizable presets are accessible
Setup and configuration can be accomplished using the front panel buttons or ClearOne's AP-Ware™ software. Six customizable presets are accessible on-the-fly from a remote touch panel (such as AMX or Crestron), a custom control device, or the unit's front panel.

Gentner Distributed Echo Cancellation technology on each mic/line for improved performance and flexibility
Linkable — the G-Link digital bus allows up to eight AP units and up to 64 mics
All eight inputs incorporate Automatic Gain Control (AGC) — to compensate for loud or soft voices
The matrix allows for simple routing customization for a wide variety of applications
Six configurable presets can be accessed on-the-fly
Full-duplex audio — for clean, transparent sound
Single rack space unit performs the function of several external audio devices
AP-Ware software provides easy, reliable system configuration
Optional infrared remote control
Specifications:

Dimensions (LxDxH): 17.25" x 10.25" x 1.75" (43.8 x 26 x 4.5 cm)

Weight: 7 lb/4.5 kg dry, 12 lb/5.9 kg shipping

Operating Temperature: 32–100° F/0–38° C

Humidity: 15% to 80%, non-condensing

Power Input Range:
Auto-adjusting 100–240VAC; 50/60Hz

Power Consumption: 30W typical

G-Link In/Out:
Proprietary Network RJ-45 (2), 38.4kbps, 110k. impedance
Category five twisted-pair cable 20' (6 meters) maximum cable length between any two Audio Perfect products

RS-232:
DB-9 female 9,600 (default)/19,200/38,400 baud rate; 8 bits, 1 stop, no parity
Hardware flow control on (default)/off

Control/Status:
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: Open collector, 40VDC max, 40mA each +5VDC pins (2) (300mA over-current protected)

Mic/Line Inputs 1-8:
Push-on terminal block, balanced, bridging
Impedance: 5k.
Nominal Level: adjustable -55dBu, -25dBu, 0dBu
Maximum Level: -33dBu, -4dBu, +20dBu
Echo Cancellation: 120ms tail time (works with 12dB of room gain)
Phantom Power: 24V, selectable

Line Inputs A-D:
Push-on terminal block, balanced, bridging
Impedance: >20k.
Nominal Level: 0dBu
Maximum Level: 19dBu

Outputs 1-12:
Push-on terminal block, balanced
Impedance: 50.
Nominal Level: 0dBu
Maximum Level: 19dBu

Audio Performance:
Conditions: Unless otherwise specified, all measurements are performed with a 22Hz to 22kHz BW limit (no weighting).
Frequency Response: 20Hz–15kHz ±2dB
Noise (EIN): -125dBu, 15kHz BW, max gain, Rs=150.
THD+N: <0.1%
SNR: 65dB re 0dBu
Dynamic Range: 85dB

Approvals: FCC, CSA, CE

Matrix Mixing Parameters: 12x12 matrix

Auto Mixer Parameters:
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate

Microphone Input Configuration:
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Mute on/off
Chairman Override on/off
High Pass Filter
EQ Adjust
AGC on/off
Auto Gate/Manual Gate/Gate override
Adaptive Ambient on/off