SALE! K-Array – 16x Mugello KH2 Top, 4x KS5 Subwoofer + Rigging Accessories (COMPLETE SET) Line Array

Complete Line Array set: K-Array 16x Mugello KH2 self powered top cabinet, 4x KS5 active subwoofer, 2x Fly Frames, 2x stack frames in good condition.
Order now: https://www.cuesale.com/product/k-array-line-array-mugello-kh2-top-cabinet-ks5-subwoofer-rigging-accessories-complete-set/

About the KH2 Top Cabinets:
The Mugello-KH2 is the smallest mid-high line array element offered in our flagship line. The self-powered speaker is comprised of two 8” neodymium magnet woofers each with a 2.5” voice coil and two 1.4” compression drivers with a 2.5” voice coil each.

However small in size, the Mugello-KH2 delivers a really large sound, ensuring exceptionally high performance with a peak SPL of 136 dB. Measuring at 735 x 285 x 200 mm (net dimensions), this compact speaker is a perfect solution for applications in intimate concert halls, theaters and clubs.

Type: Active line array element
Transducers: 2x 8” neodymium magnet woofer with 2.5” voice coil
2x compression driver with 2.5” voice coil
Frequency Response(1): 120 Hz – 19 kHz (-6 dB)
Maximum SPL(2): 136 dB peak
Coverage: V. 20° | H. 110°
Connectors: Analog: 2x XLR (bal) input signal + 2x XLR (bal) parallel output
Digital: 1x XLR AES3 input + 1x XLR AES3 output
Control: Remote control with dedicated PC software via USB or RS485
Onboard touch screen display.
Built-in DSP: Input gain, delay up to 330 ms, 8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), FIR filter for electronic beam steering Onboard preset, Level and temperature remote monitoring
AMPLIFIER Top Cabinet
Type: 2-ch., switch mode, class D
Output power: 2x 1000 W @ 8 Ω 1% THD+N
Power consumption: 300 W @ 8 Ω load, Pink noise 1/8 rated power
Protections: Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Operating range: 100-240V AC, 50-60 Hz with PFC
Mains connector: powerCON with link inlet


About the KS5 Active subwoofers:
The Mugello-KS5 is an incredibly versatile, dual 21″ self-powered subwoofer featuring neodymium magnets with 6″ voice coils driven by a powerful Class D amplifier. The large ports are designed to be fully symmetrical to the speakers which means the back loading of the drivers is consistent and even with no port air turbulence. The triangle port construction also provided excellent structural integrity and strength, effectively eliminating any box resonance.

The rear panel provides inputs for both balanced line signals and digital signals in AES/EBU protocol, also on an XLR for ease of cabling.

All DSP functions including EQ can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR. There are different DSP presets, specifically made by K-array to optimize the system performance of the variety of device configuration available. Additionally, you can also create, save, and store your own personal presets on the Mugello-KS5.

Type: Active subwoofer
Transducers: 2 x 21” Neodymium magnet woofer with 5.31” voice coil
Frequency Response (1): 25 Hz – 120 Hz (-6 dB)
Maximum SPL (2): 141 dB peak
Coverage: Omni
Connectors: Analog: 2x XLR (bal) input signal + 2x XLR (bal) parallel output
Digital: 1x XLR AES3 input + 1x XLR AES3 output
Control: Remote control with dedicated PC software via USB or RS485.
Onboard touch screen display.
Built-in DSP: Input gain, delay up to 330 ms, 8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), FIR filter for electronic beam steering Onboard preset, Level and temperature remote monitoring
AMPLIFIER subwoofer
Type: 2-ch., switch mode, class D
Output power: 2x 3500 W @ 2 Ω 1% THD+N
Power consumption: 600 W @ 4 Ω load, Pink noise 1/8 rated power
Protections: Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Operating range: 100-240V AC, 50-60 Hz with PFC
Mains connector: powerCON with link inlet



From €54995,00 now for €29995,00 Ex V.A.T. (MwST) per unit.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com