Crown I-Tech 6000

Crown I-Tech 6000 in good condition.
Order now: https://www.cuesale.com/product/crown-i-tech-6000/


The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound and installed sound applications. Onboard DSP provides a wide array of signal processing, greatly reducing the need for rack components and rack wiring. Onboard DSP features 24-bit, 96 kHz A/D and D/A converters. All models are compatible with the HiQnet Network and TCP/IQ networking. Digital audio and HiQnet/IQ control signals connect to the amp via a single CobraNet cable in optional CN models, coming soon. Pushbutton DSP presets simplify the setup for various loudspeaker arrays. The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight. I-Tech amplifiers have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation patented Class-I (BCA) circuitry couples powerefficiently to the load and allows low AC current drain. A front-panel control screen shows advanced diagnostics and status information.



Features:
Global Power Supply – designed to deliver maximum power no matter where your schedule takes you
Studio Quality Processing – integrated processing reduces DSP noise for a quieter overall system
Peak voltage and RMS power limiting protects your speaker investment
Front panel LCD provides diagnostics and preset selection to ensure fast and easy system setup
Front panel lockout – ensures that tunings and presets are safely stored and protected from curious users
Remote monitoring and control for complete system control anywhere in the venue


Power Output:

2-ohm Stereo (Per Channel): 2500W
4-ohm Stereo (Per Channel): 3000W
8-ohm Stereo (Per Channel): 1500W
4-ohm Bridged-Mono: 5000W
8-ohm Bridged-Mono: 6000W
Specifications:

Compact, reliable and ultra powerful amp
Frequency response (at 1 watt, 20Hz – 20kHz): ?0.25dB
Signal to noise ratio below rated 8 ohm power, A-weighted: >105 dB
Total harmonic distortion (THD) at full rated power: < 0.35%
Damping factor (20Hz – 100Hz): > 5000
Common mode rejection (CMR) (20Hz – 1kHz): > 50 dB
Input impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced
Maximum input level: 15dBu or 22 dBu, depending on input sensitivity
Latency (analog, digital inputs): 1.05 mS analog, 2.29 mS digital (44.1kHz)
A/D, D/A converters: 24-bit, 96kHz Cirrus Logic
Digital input: AES/EBU, 16-24-bit, 32-48kHz. Onboard sample rate converter Optional CobraNet input coming soon
Network: Onboard TCP/IQ, compatible with standard 100MB ethernet hardware
DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Bypass mode available. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators
Load supervision: Monitors the average impedance on the output of the amplifier. Attenuators: Speed sensitive, continuously variable rotary encoder, 0.5 dB steps, range 0 to ?100 dB
Load impedance: stereo: 1/2/4/8/16 ohms; bridge mono: 2/4/8 ohms
Voltage gain (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.5V (39.3 dB gain to 24.7 dB gain)
Required AC mains: Universal AC input, 100-240 VAC, 50/60 Hz (?15%)
Maximum AC mains voltage: 277 VAC
AC line connector: five cordsets supplied with amplifier (USA, UK,
Europe, Australia, India)
Front panel controls and indicators: bridge mode, ready, signal, clip, thermal, fault, data, power, AC mains present
Glowing blue screen and controls: these let the user adjust the amplifier’s attenuation and muting, configure the amp, set up error monitoring (such as temperature and load supervision) and recall DSP presets. The presets allow the user to quickly reconfigure the amp for various applications.
LCD control screen: integrated LCD with white LED backlight, controls amplifier setup and operation
Attenuator: controls amplifier attenuators in 0.5 dB steps
Main menu (amplifier setup): bridge, input Y, recall preset, LCD contrast, input sensitivity
Advanced menu: attenuator limit, attenuator link, clip limiter, output voltage limiter, output power limiter, pink noise generator, monitor, input, max input, power-up options
Power Cord Connector: Standard 20 amp IEC inlet
Switch/circuit breaker: resets the circuit breaker that protects the
power supply
Output connectors: 2 Speakon, 2 binding posts, 2 male XLR passive analog loop through, XLR active/re-clocked AES/EBU digital loop through
Analog input connectors: 3-pin female XLR connector for each channel
Digital input connector: 3-pin female XLR connector that accepts a digital signal in the AES/EBU format
Ethernet connector: accepts an RJ45 connector for IQ TCP/IQ networking and optional CobraNet transport from a standard network cable. Built into the connector is a yellow LINK ACT indicator that shows network activity, and a green 100MB indicator that shows a 100MB network connection
Cooling: dual-zone, microprocessor controlled, continuously variable
speed, front-to-back airflow
Front Panel: Cast aluminum with integrated handles.
Included accessories: rear rack ears with integral EZ-Rack pin, cable retention bar, rack screws, operation manual, power cords, foam air filter
Size: 482mm w x 89mm h x 411mm d. Wt. 12.7kg.




€995,00 Ex V.A.T. (MwST) per unit.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com